ISO 150bar 37mn Oxygen Tanks Gas Bottle Industrial Cylinders

• Customization: Available
• After-sales Service: 24 Hours Online Service
• Warranty: One Year
• Model NO.: WMA89-1L-150
• Function: Storage Pressure Vessel, Heat Pressure Vessel
• Application: Mixture
• Material: Alloy
• Pressure: Working Pressure: 150bar
• Storage Medium: Gas
• Pressure Level: Hydrostatic Test Pressure: 250bar
• Condition: New
• Production Cycle: 15 to 30 Days
• Processing Capacity: Annual Output of 800,000
• Production Standard: ISO9809-3
• Charging Medium: Oxygen, Nitrogen, Argon, Helium, Laughing Gas, Air
• Color: Refer to Raul′s Color Card
• Assembly Method: Gas Cylinder Body + Valve
• Use Cylinders: Our Seamless Steel Cylinders Are Widely Used in in
• Products Can Be Exported to Countries or: China, Southeast Asia, Middle East, Asia, Africa,
• Transport Package: Net Sleeve or Carton or Tray
• Specification: 1-80 litres
• Trademark: HS
• Origin: Made in China
• HS Code: 7311009000
• Production Capacity: Annual Output of More Than 800, 000 Pieces

Product Description

Product Description

ISO 150BAR 37MN OXYGEN TANKS GAS BOTTLE INDUSTRIAL CYLINDERS

1,Minimum order quantity: 100 only

2,We are China's gas cylinder production factory, product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America

3,Use gas cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research

4,We require that the appearance of the bottom of the bottle should be smooth, without folding, steps and grooves.  The inner surface of the bottom of the bottle should not have visible concave holes, folds, bumps and oxide skin;  The outer diameter and height of the bottle mouth should meet relevant standards (such as ISO9809-3/ISO9809-1/GB/T5099.3/TUV/TPED); 

5,EN ISO 11114-4, Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement EN ISO 13769, Gas cylinders - Stamp marking.

6,For cylinders with a wall thickness of less than 7,5 mm, the fracture shall be acceptable only if it conforms to one of the following descriptions: longitudinal, without branching [see Figure 5 a)]; longitudinal, with a side branching at each end, which in no case extends beyond the longitudinal plane normal to the fracture plane [see Figure 5 b)]; longitudinal, with fishtail branching at one end [see Figure 5 c)], or at both ends [see Figure 5 d)].

 

Product Information:

1,Iso9809-3 or GB/T5099.3 production standards; 0.8 liters to 80 liters; 89mm-267mm cylinder outer diameter; Working pressure is 150bar; 37 mn material; Hydrostatic test pressure is 250bar;

2,Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L); The cylinder body weight is 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm;

3,Aliases:150bar Oxygen Tanks; 37 mn Oxygen tanks. 150 bar gas bottle; Industrial Oxygen cylinders; Industrial Oxygen tanks

4,Type approval procedure :A technical specification of each new design of cylinders or cylinder family as defined in , including design drawing, design calculations, steel details, manufacturing processes and heat treatment details, shall be submitted by the manufacturer to the inspector. The type approval tests detailed in shall be carried out on each new design under the supervision of the inspector.

5,A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies: 

a) it is manufactured in a different factory; 

b) it is manufactured by a different process ; this includes the case when major process changes are made during the production period, e.g. end forging to spinning, change in type of heat treatment etc.;

6,The cylinder bases shall be sectioned to measure the thickness and to ensure that this thickness is sufficiently close to the minimum thickness prescribed in the design and shall be within the usual production tolerances. In no case shall the actual base thickness exceed the minimum value(s) specified on the drawing by more than 15 %.

Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.

Product Parameters

 

 

 

Type	Outside Diameter (mm)	Water Capacity (L)	Bottle  Height (mm)	Weight (kg)	Working  pressure (Bar)	Design wall  thickness (mm)	Material Grades
WMA89-1L-150	89	1	240	1.83	150	2.4	37MN
WMA89-1.4L-150	89	1.4	310	2.30	150	2.4	37MN
WMA108-2.0L-150	108	2	310	3.62	150	2.9	37MN
WMA108-2.5L-150	108	2.5	374	4.29	150	2.9	37MN
WMA108-3.0L-150	108	3.0	440	4.96	150	2.9	37MN
WMA108-5.0L-150	108	5.0	696	7.74	150	2.9	37MN
WM140-3.4L-150	140	3.4	324	5.3	150	3.8	37MN
WM140-4.0L-150	140	4.0	375	5.89	150	3.8	37MN
WM140-5.0L-150	140	5.0	447	6.96	150	3.8	37MN
WM140-6.3L-150	140	6.3	540	7.88	150	3.8	37MN
WM140-6.7-150	140	6.7	569	8.30	150	3.8	37MN
WM140-8.0L-150	140	8.0	665	9.68	150	3.8	37MN
WM140-9.0L-150	140	9.0	744	10.7	150	3.8	37MN
WM140-10.0L-150	140	10.0	818	11.9	150	3.8	37MN
WM159-8.0L-150	159	8.0	548	9.11	150	4.3	37MN
WM159-10.0L-150	159	10.0	660	10.9	150	4.3	37MN
WM159-12.0L-150	159	12.0	780	13.1	150	4.3	37MN
WM159-13.4L-150	159	13.4	861	15.4	150	4.3	37MN
WM159-15.0L-150	159	15.0	932	16.8	150	4.3	37MN
WM180-20.0L-150	180	20.0	1012	24.8	150	4.9	37MN
ISO219-40.0L-150	219	40.0	1300	48.0	150	5.7	37MN
ISO232-40.0L-150	232	40.0	1167	43.0	150	6.0	37MN
ISO232-46.7L-150	232	46.7	1345	48.9	150	6.0	37MN
ISO232-47.0L-150	232	47	1351	49.0	150	6.0	37MN
ISO232-50.0L-150	232	50.0	1450	57.7	150	6.0	37MN

 

 

Company Profile

 

Shandong Hongsheng Pressure Vessel Co., Ltd. is a professional global gas cylinder manufacturer registered in China.

Registered in Qihe County, Dezhou City, Shandong Province, China, the company has obtained the Chinese production cylinder B1 license and TUV, CE certification.

The list of ingredients is as follows: List of chemical composition (mass fraction) /%  
 

Mark	C	Si	Mn	P	S	S+P	Cr	Mo	V	Ni	Cu
37Mn	0.34~0.40	0.10~0.30	1.35~1.75	≤0.015	≤0.010	≤0.020	≤0.30	-	-	≤0.30	≤0.20
34CrMo4	0.30~0.37	≤0.40	0.60~0.90	≤0.015	≤0.010	≤0.020	1.9~1.2	0.15~0.3	-	≤0.30	≤0.20

 

Certifications

Packaging & Shipping

FAQ

1. Who are we?
We are based in Shangdong, China, sell to Eastern Asia(12.00%),South America(11.00%),Southeast Asia(10.00%),Africa(10.00%),Mid East(10.00%),Northern Europe(10.00%),South Asia(10.00%),Eastern Europe(6.00%),Western Europe(6.00%),North America(5.00%),Central America(3.00%),Southern Europe(3.00%),Oceania(2.00%),Domestic Market(2.00%). 

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
GAS CYLINDER,HIGH PRESSURE GAS CYLINDER,DISPOSABLE GAS CYLINDER,FIRE EXTINGUISHER,VALVE


4. Why should you buy from us not from other suppliers?
We will provide more quality products and services,better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

 

For each production order, we will hold a production technical meeting before production, and display the order information on the workshop screen at any time to ensure zero error. 

Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.