| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Online Service |
| Warranty: | One Year |
|
Still deciding? Get samples of US$ 130/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
50L ISO9809-1 TPED 230bar34CrMo4 Oxygen Tanks Gas Cylinders
50L TPED 230bar ISO9809-1 34CrMo4 Oxygen tanks gas cylinders
Product Information:
1,TPED 232mm cylinder outer diameter; Working pressure 230bar; Hydrostatic test pressure 345bar;50 litres; 34CrMo4 alloy steel; Iso9809-1 production standard;
2,Oxygen cylinder body height 1460mm; Oxygen cylinder body weight 56.3kg; Maximum oxygen tank capacity is 11.5m3 (11,500 liters); The minimum design wall thickness of oxygen cylinder is 5.8mm; Oxygen cylinder mouth thread PZ27.8; 25E; 3/4-14 NGT, etc.;
3,50L 230bar gas cylinders;230bar 50L Oxygen tanks; TPED 230bar gas cylinders; 230bar gas cylinders;50L 230bar Oxygen cylinders;
Tips for safe use of gas cylinders:
It is strictly forbidden to mix gas cylinders with inflammable and explosive objects.
The cylinder cap should be tightened before handling. Gas cylinders should be loaded and unloaded lightly. Throwing, rolling and collision are strictly prohibited. Gas cylinders should be moved using handcarts, boards, etc.
Do not use gas bottle caps as lifting points or handles.
Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.
Gas cylinder design requirements (ISO9809-1 standard) :
1, bottle body wall thickness :(1)a=D{1-[(10fre-31/2ph)/10FRe]1/2}/2; (2) a or D / 250 + 1; (3) a 1.5 mm or more;
2, bottle bottom structure (concave) :(1)a1≥2a; A2 2 a or higher; R acuity 0.075 D; 0.12 D H p; (2) there should be a transition between concave bottom ring shell and cylinder body; (3) fatigue test;
3. The outer diameter and wall thickness of the neck after forming should be suitable for the torque required by the installation of the valve. When determining the minimum wall thickness, it should be considered that the installation of the valve without the support of accessories such as the collar does not produce permanent deformation
1,Product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America;
We are China's gas cylinder production factory,
2,Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
3.Common sense: GB5099, national standard, used for filling permanent gas, high pressure liquefied gas cylinder standard.
4,Minimum order quantity: 100 only
5,The cylinder shall actually experience the maximum and minimum cyclic pressures during the test. The frequency of reversals of pressure shall not exceed 0,25 Hz (15 cycles/min.). The temperature measured on the outside surface of the cylinder shall not exceed 50 °C during the test.
6,After the test, the cylinder bases shall be sectioned to measure the thickness and to ensure that this thickness is sufficiently close to the minimum thickness prescribed in the design and shall be within the usual production tolerances. In no case shall the actual base thickness exceed the minimum value(s) specified on the drawings by more than 15 %. The test shall be considered satisfactory if the cylinder attains the required number of cycles without developing a leak.
34CrMo4 50L ISO9809-1 TPED 230bar Oxygen Tanks Gas Cylinders
|
Type |
Outside Diameter (mm) |
Water Capacity (L) |
Bottle Height (mm) |
Weight (kg) |
Working pressure (Bar) |
Design wall thickness (mm) |
Material Grades |
| ISO232-50.0L-230 | 232 | 50.0 | 1460 | 56.3 | 230 | 5.8 | 34CrMo4 |
| Mark | C | Si | Mn | P | S | S+P | Cr | Mo | V | Ni | Cu |
| 37Mn | 0.34~0.40 | 0.10~0.30 | 1.35~1.75 | ≤0.015 | ≤0.010 | ≤0.020 | ≤0.30 | - | - | ≤0.30 | ≤0.20 |
| 34CrMo4 | 0.30~0.37 | ≤0.40 | 0.60~0.90 | ≤0.015 | ≤0.010 | ≤0.020 | 1.9~1.2 | 0.15~0.3 | - | ≤0.30 | ≤0.20 |
1. Who are we?
We are based in Shangdong, China, sell to Eastern Asia(12.00%),South America(11.00%),Southeast Asia(10.00%),Africa(10.00%),Mid East(10.00%),Northern Europe(10.00%),South Asia(10.00%),Eastern Europe(6.00%),Western Europe(6.00%),North America(5.00%),Central America(3.00%),Southern Europe(3.00%),Oceania(2.00%),Domestic Market(2.00%).
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
GAS CYLINDER,HIGH PRESSURE GAS CYLINDER,DISPOSABLE GAS CYLINDER,FIRE EXTINGUISHER,VALVE
4. Why should you buy from us not from other suppliers?
We will provide more quality products and services,better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
){kind=link}