1L ISO9809-3 Steel Seamless Oxygen Gas Cylinders

• Customization: Available
• After-sales Service: 24 Hours Online Service
• Warranty: One Year
• Model NO.: WM89-1L-150
• Function: Heat Pressure Vessel
• Application: Mixture
• Material: Alloy
• Pressure: Working Pressure: 150bar
• Storage Medium: Gas
• Pressure Level: Hydrostatic Test Pressure: 250bar
• Condition: New
• Production Cycle: 15 to 30 Days
• Processing Capacity: Annual Output of 800,000
• Production Standard: ISO9809-3
• Charging Medium: Oxygen, Nitrogen, Argon, Helium, Laughing Gas, Air
• Color: Refer to Raul′s Color Card
• Assembly Method: Gas Cylinder Body + Valve
• Use Cylinders: Our Seamless Steel Cylinders Are Widely Used in in
• Products Can Be Exported to Countries or: China, Southeast Asia, Middle East, Asia, Africa,
• Transport Package: Net Sleeve or Carton or Tray
• Specification: 1-80 litres
• Trademark: HS
• Origin: Made in China
• HS Code: 7311009000
• Production Capacity: Annual Output of More Than 800, 000 Pieces

Product Description

Product Description

ISO9809-3 150bar 37MN TUV TPED Oxygen Tanks Gas Cylinders

1,0.8 litres to 80 litres; 89mm-267mm cylinder outer diameter; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 or GB/T5099.3 production standards;

2,The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; The cylinder body weight is 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L)

3,Aliases: Oxygen gas cylinders; Germany Rhein gas cylinder; 150 bar cylinder; Oxygen bomb; Gas cylinders.

4,A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies:

a) the nominal outside diameter has been changed; 

b) the guaranteed minimum thickness has been changed; 

c) the hydraulic test pressure, ph, has been increased (where a cylinder is to be used for lower pressure duty than that for which design approval has been given, it shall not be deemed to be a new design); 

d) the guaranteed minimum yield strength, Reg and/or the guaranteed minimum tensile strength, Rmg, have changed.

5,Test conditions :As the cylinder and test equipment are being filled with water, care shall be taken to ensure that no air is 

trapped in the circuit by operating the hydraulic pump until water is discharged from the vent or air-release valve. 

During the test, pressurization shall be carried out in two successive stages. 

a) In the first stage, the pressure shall be increased at a rate of not more than 5 bar/s up to a pressure value corresponding to the initiation of plastic deformation; 

b) In the second stage, the pump discharge rate shall be maintained at as constant a level as possible until the cylinder bursts.

Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.

Product Parameters

Type	Outside Diameter (mm)	Water Capacity (L)	Bottle  Height (mm)	Weight (kg)	Working pressure (Bar)	Design wall thickness (mm)	Material Grades
WM 89-0.8-150	89	0.8	197	1.60	150	2.4	37MN
WM 89-1-150	89	1	240	1.83	150	2.4	37MN
WM 89-1.2-150	89	1.2	275	2.07	150	2.4	37MN
WM 89-1.4-150	89	1.4	310	2.30	150	2.4	37MN
WM 89-2-150	89	2	419	3.00	150	2.4	37MN
WM 108-1.4-150	108	1.4	233	2.81	150	2.9	37MN
WM 108-1.8-150	108	1.8	284	3.4	150	2.9	37MN
WM 108-2.0-150	108	2	310	3.62	150	2.9	37MN
WM 108-2.5-150	108	2.5	374	4.29	150	2.9	37MN
WM 108-3.0-150	108	3	440	4.96	150	2.9	37MN
WM 108-3.2-150	108	3.2	464	5.24	150	2.9	37MN
WM 108-3.5-150	108	3.5	503	5.8	150	2.9	37MN
WM 108-4.0-150	108	4	568	6.30	150	2.9	37MN
WM 108-4.5-150	108	4.5	630	6.90	150	2.9	37MN
WM 108-5.0-150	108	5	696	7.64	150	2.9	37MN
WM 140-3.4-150	140	3.4	324	5.3	150	3.8	37MN
WM 140-4.0-150	140	4	375	5.89	150	3.8	37MN
WM 140-5.0-150	140	5	447	6.96	150	3.8	37MN
WM 140-6.0-150	140	6	516	7.56	150	3.8	37MN
WM 140-6.3-150	140	6.3	540	7.88	150	3.8	37MN
WM 140-6.7-150	140	6.7	569	8.30	150	3.8	37MN
WM 140-7.0-150	140	7	591	8.63	150	3.8	37MN
WM 140-8.0-150	140	8	665	9.68	150	3.8	37MN
WM 140-9.0-150	140	9	744	10.7	150	3.8	37MN
WM 140-9.1-150	140	9.1	751	10.9	150	3.8	37MN
WM 140-10-150	140	10	818	11.9	150	3.8	37MN
WM 140-11-150	140	11	892	12.9	150	3.8	37MN
WM 140-12-150	140	12	966	14.3	150	3.8	37MN
WM 140-13.4-150	140	13.4	1069	15.5	150	3.8	37MN
WM 140-14-150	140	14	1112	16.4	150	3.8	37MN
WM 140-15-150	140	15	1188	17.5	150	3.8	37MN
WM 159-8.0-150	159	8	548	9.11	150	4.3	37Mn
WM 159-9.4-150	159	9.4	627	10.8	150	4.3	37MN
WM 159-10.0-150	159	10	660	10.9	150	4.3	37MN
WM 159-11.0-150	159	11	716	11.8	150	4.3	37MN
WM 159-12.0-150	159	12	780	13.1	150	4.3	37MN
WM 159-13.4-150	159	13.4	861	15.4	150	4.3	37MN
WM 159-15.0-150	159	15	932	16.8	150	4.3	37MN
WM 180-8.0-150	180	8	467	13.5	150	4.9	37MN
WM 180-10-150	159	10	571	15.4	150	4.9	37MN
WM 180-13.4-150	159	13.4	721	18.6	150	4.9	37MN
WM 180-15-150	159	15	792	20.2	150	4.9	37MN
WM 180-18-150	159	18	924	23.1	150	4.9	37MN
WM 180-20-150	159	20	1012	24.8	150	4.9	37MN
ISO 219-40-150	219	40	1310	47.8	150	5.7	37MN
ISO 232-40-150	232	40	1167	43.0	150	5.3	37MN
ISO 232-46.7-150	232	46.7	1345	48.9	150	5.3	37MN
ISO 232-47-150	232	47	1351	49.0	150	5.3	37MN
ISO 232-50-150	232	50	1430	50.0	150	5.3	37MN
ISO 267-60-150	267	60	1330	66.7	150	5.8	37MN
ISO 267-68-150	267	68	1490	73.9	150	5.8	37MN
ISO 267-70-150	267	70	1530	75.7	150	5.8	37MN
ISO 267-80-150	267	80	1730	84.7	150	5.8	37MN

 

Company Profile

 

Shandong Hongsheng Pressure Vessel Co., Ltd. is a professional global gas cylinder manufacturer registered in China.

Registered in Qihe County, Dezhou City, Shandong Province, China, the company has obtained the Chinese production cylinder B1 license and TUV, CE certification.

The list of ingredients is as follows: List of chemical composition (mass fraction) /%  
 

Mark	C	Si	Mn	P	S	S+P	Cr	Mo	V	Ni	Cu
37Mn	0.34~0.40	0.10~0.30	1.35~1.75	≤0.015	≤0.010	≤0.020	≤0.30	-	-	≤0.30	≤0.20
34CrMo4	0.30~0.37	≤0.40	0.60~0.90	≤0.015	≤0.010	≤0.020	1.9~1.2	0.15~0.3	-	≤0.30	≤0.20

 

Certifications

Packaging & Shipping

FAQ

1. Who are we?
We are based in Shangdong, China, sell to Eastern Asia(12.00%),South America(11.00%),Southeast Asia(10.00%),Africa(10.00%),Mid East(10.00%),Northern Europe(10.00%),South Asia(10.00%),Eastern Europe(6.00%),Western Europe(6.00%),North America(5.00%),Central America(3.00%),Southern Europe(3.00%),Oceania(2.00%),Domestic Market(2.00%). 

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
GAS CYLINDER,HIGH PRESSURE GAS CYLINDER,DISPOSABLE GAS CYLINDER,FIRE EXTINGUISHER,VALVE


4. Why should you buy from us not from other suppliers?
We will provide more quality products and services,better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

 

For each production order, we will hold a production technical meeting before production, and display the order information on the workshop screen at any time to ensure zero error. 

Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.